Metal roofs handle Palm Beach County’s tropical climate better than many alternatives because they shed heat and resist wind-driven rain during hurricane season. In neighborhoods like Northwood and Roosevelt Estates, where homes date from the 1950s and 1960s, crews often replace older asphalt shingles with 26-gauge galvanized or aluminum panels that meet current wind-load requirements. Proper underlayment and sealed seams prevent moisture intrusion when summer humidity stays above 80 percent for weeks.
Standing seam systems are common on newer construction near CityPlace and Clematis Street because the concealed fasteners reduce leak points during heavy downpours. In older districts such as El Cid and Flamingo Park, installers must match historic profiles while adding ridge vents that release trapped heat from attics. Salt air from the Intracoastal accelerates corrosion on uncoated steel, so local crews specify AZ-50 Galvalume or marine-grade coatings on every coastal job.
Edge details around skylights, chimneys and solar mounts require extra flashing when roofs sit under the tall palms common in Grandview Heights. During warm winters, thermal expansion can loosen fasteners if the original installer skipped expansion joints; re-securing these points before hurricane season prevents most callbacks. Metal also reflects sunlight, lowering attic temperatures in homes without deep overhangs typical of mid-century West Palm Beach stock.
Metal is the strongest performer in this climate and the least chosen, almost entirely because of the upfront price. It runs roughly double shingle installed. In exchange you get 30 to 50 years instead of 15 to 20, the best wind uplift performance of any common residential system, and a reflective surface that keeps attic temperatures down through a Palm Beach County summer. On a house you plan to keep, the math usually favors metal despite the entry cost.
Two systems, and the difference matters. Standing seam uses concealed clips, so no fastener penetrates the panel surface, removing the most common long-term leak path. Exposed-fastener panel is cheaper and perfectly serviceable, but the rubber washers under those screws are consumable and need inspecting around year 15. Near the coast, where salt accelerates everything, standing seam is usually the better economics.
Corrosion protection is not optional this close to the Atlantic. We specify galvalume or aluminum panels with coastal-rated coatings rather than generic product, use stainless or coated fasteners, and never put dissimilar metals in contact at flashings, because galvanic corrosion in salt air shows up as staining and pitting within a few years rather than decades.
On insurance, be careful what you assume. Some Florida carriers give a credit for a wind-rated metal roof and some give nothing, and it varies by carrier more than by product. What metal reliably does is take the roof-age question off the table for decades, which matters increasingly as carriers tighten on older roofs statewide. Ask your carrier for their specific credit in writing before you factor savings into the decision.
Technician insight
In West Palm Beach the thing that catches most people out with metal roofing is underestimating how salt air from the Intracoastal eats through standard coatings on homes in El Cid and Flamingo Park. If the original installer skipped marine-grade fasteners or proper edge sealing, you will see rust streaks within three seasons. Checking the underside of panels during any repair visit usually reveals whether the previous work will survive the next hurricane season.
Northwood Metal Roof Overlay
A 1960s ranch in Northwood showed widespread granule loss on the south-facing slope after repeated summer storms. Inspection found loose fasteners and minor deck rot near the ridge. Crews installed a standing seam overlay with new underlayment and sealed all penetrations, restoring wind resistance without a full tear-off.
Metal Roofing Services We Offer
✓Standing Seam Metal Roof Installation
Concealed-fastener panels installed on homes in Downtown West Palm Beach and Northwood to handle high winds and reduce leak points during storms.
✓Corrugated Metal Roof Replacement
Direct replacement of aging corrugated panels on properties in Lake Worth and Boynton Beach using 26-gauge material rated for Palm Beach County wind codes.
✓Hurricane Rated Metal Roofing
Panels and attachments engineered for 150-plus mph winds, commonly specified for El Cid and Flamingo Park homes ahead of hurricane season.
✓Metal Roof Repair After Storm Damage
Targeted fixes for dented or loosened panels on roofs in Roosevelt Estates and Grandview Heights following tropical storms.
✓Metal Roofing Over Existing Shingles
Lightweight overlay systems that avoid full tear-off on older Northwood and Palm Beach homes while improving heat reflection.
Metal Roofing Cost in West Palm Beach, FL
| Service | Typical Range | What Affects It |
|---|---|---|
| Standing seam overlay | $9–$14 per sq ft | Price rises with steep pitches or multiple skylights |
| Full tear-off and new metal | $12–$18 per sq ft | Higher when rotted decking must be replaced |
| Storm damage panel repair | $250–$650 per panel | Depends on size and coating match |
| Ridge vent addition | $8–$12 per linear ft | Common upgrade on older Northwood homes |
Ranges are typical for West Palm Beach, FL and confirmed with an exact written quote before any work starts.
How it works
- 1
Site Assessment
Measure roof pitch, check deck condition and note existing ventilation on homes from Downtown West Palm Beach to Boynton Beach.
- 2
Material Selection
Choose gauge, coating and color suited to salt air exposure and local wind requirements.
- 3
Removal and Prep
Strip old roofing where needed, install new underlayment and seal all penetrations.
- 4
Panel Installation
Lay panels with proper overlaps, fasten per code and flash valleys, ridges and walls.
- 5
Final Inspection
Walk the roof, test seams and confirm drainage before cleanup.
Pricing
Metal roofing costs vary with panel type, home size and access; most West Palm Beach jobs fall in published ranges below.